이더리움 2.0, 9월 말 경 첫 메인넷 하드포크 'Altair' 실시 예정

이더리움 2.0, 9월 말 경 첫 메인넷 하드포크 'Altair' 실시 예정

이더리움 2.0, 첫 메인넷 하드포크 'Altair' 실시 예정

1. Subject

Ethereum 2.0 plans first mainnet hard fork Altair

2. 적용 일자

2021-08-25

3. 상세정보 직접 번역

2021년 8월 25일 이더리움 재단은 이더리움의 클라이언트 팀이 이더리움 2.0 메인넷(Beacon Chain)의 첫 하드포크인 Altair을 9월 말 경으로 목표하고 있다고 발표했습니다. 현재 Altair 관련 테스트는 이더리움 2.0의 Pyrmont 공개 테스트넷에서 진행 중이며, 특히 네트워크가 과부하 상태일 때 Altair의 반응을 살피고 있습니다. Altair 하드포크 시범 이후 2021년 9월 2일 오후 12시 UTC 로 예정된 Prater 테스트넷에서 하드포크가 이루어질 예정이며, Prater 테스팅은 Pyrmont 보다 긴 시간을 거쳐 지행될 예정입니다. 테스트넷에서 주요 프로그래밍 및 성능 문제가 발견되지 않을 경우, Altair는 9월 말에 Beacon Chain 메인넷에서 업그레이드됩니다.

이더리움 2.0 Beacon Chain

기존 이더리움 네트워크와 이더리움 2.0의 가장 큰 차이는 각 네트워크가 사용하는 합의 메커니즘으로 기존 이더리움은 작업 증명 방식(PoW, Proof-of-Work)을 사용하며, 이더리움 2.0은 지분 증명 방식(Proof-of-Stake) 합의 메커니즘을 사용합니다.

합의 메커니즘은 블록체인 시스템이 네트워크의 단일 상태에 동의하는데 사용되는 알고리즘 입니다. 블록체인의 여러 노드는 본질적으로 서로 연결되어 있지 않은 분산된 여러 컴퓨팅 시스템에 의해 구동되기 때문에 일정한 시간 간격으로 네트워크 상태를 통일하는 수단이 있어야 합니다. 이는 이더리움 블록체인의 공식 버전이 하나만 있음을 보장하고 모든 분산된 컴퓨터가 동일한 정보를 기록 및 접속할 수 있도록 합니다.

현재 이더리움의 합의 메커니즘은 작업 증명 방식으로 진행됩니다. 작업 증명 방식은 블록체인의 안정성 측면에서는 최고의 성능을 발휘하지만 과도한 에너지 사용을 필요로 합니다. 작업 증명 방식으로 진행할 경우 블록체인에서 채굴자는 개인 컴퓨팅 파워를 사용하여 트랜잭션을 검증하고 블록체인에 블록을 추가할 수 있는 권리를 얻기 위해 매우 복잡한 암호화 퍼즐을 해결하려고 시도합니다. 이 때 퍼즐을 풀기 위한 알고리즘은 순전히 반복적인 컴퓨팅 작업으로, 별도의 알고리즘을 통해 퍼즐을 더욱 빠르게 풀 수 있는 방식은 없습니다. 따라서 작업 증명 방식은 안전한 합의 메커니즘으로 여겨지지만, 많은 에너지를 소모하며 컴퓨팅 파워 대비 생성되는 블록의 숫자가 상대적으로 적기 때문에 네트워크의 확장성을 제한합니다.

이를 해결하기 위해 차후 출시될 이더리움 2.0은 Beacon Chain을 통해 이더리움 네트워크의 합의 메커니즘을 지분 증명 방식(Proof-of-Stake)로 변경할 것입니다. 지분 증명 방식은 작업 증명 방식이 장려하는 채굴자 경쟁을 진압합니다. 이를 위해 검증자(Validator)는 네트워크에 스테이킹한 ETH 수량과 비례하게 검증자에게 블록 생성 권리를 위임합니다. 이로써 채굴잘 간 경쟁을 없애기 때문에 기존 작업 증명 방식 대비 확장성이 뛰어나며 에너지 친화적입니다. 또한, 확장성과 그에 따른 트랜잭션 처리 속도를 향상하기 위하여 Beacon Chain은 네트워크 상태에 대한 이해를 공유하는 64개의 서로 다른 샤드 체인으로 구성됩니다. 결과적으로 이더리움 2.0은 각 샤드 체인에서 동시다발적으로 여러 블록을 생성하면서 동기화 상태를 유지할 수 있습니다. Beacon Chain은 이러한 샤드 체인이 서로 충돌하지 않도록 조정을 하고, 이 방식은 계속해서 연구개발되고 있습니다.

Beacon Chain은 현재 이더리움 메인넷을 완벽하게 대처하는 블록체인이 아닙니다. Beacon Chain은 본질적으로 스마트 컨트랙트 기능을 지원하지 않으며 단순히 지분 증명 방식의 합의 메커니즘을 이더리움 생태계에서 도입하기 위한 수단입니다. 현재 Beacon Chain과 이더리움 메인넷은 병렬로 개발되는 중이고, 추후 병합 절차를 거쳐 이더리움 메인넷의 모든 기능을 Beacon Chain의 지분 증명 방식 합의 메커니즘을 통해 사용할 수 있게 됩니다.

Altair 업그레이드

Altair 업그레이드는 Beacon Chain의 첫 번째 하드포크로 검증인에게 부여하는 경제적 인센티브와 상응하는 패널티 조정과 연관됩니다. Altair 하드포크 이후, Beacon Chain 검증자는 자신이 담당하는 트랜잭션을 검증하지 못한 경우 추가 경제적 불이익을 감수해야 하며, 이는 보다 안전한 네트워크의 원활한 진행을 위한 장치입니다. 전반적으로 지분 증명 방식을 사용하는 블록체인은 검증자에게 노드 운영을 유지하기 위한 충분한 보상을 마련해야하며, 신중하고 안정적인 운영을 촉진하는 패널티 제도도 있어야 합니다.

Altair 하드포크에 대한 세부 정보는 여기를 확인하십시오.

3. Details

On August 25th, 2021, the Ethereum Foundation announced that client teams were targeting an end-of-September Altair mainnet launch as the first major hard fork on Ethereum 2.0. Currently, testing for Altair is being conducted on the Pyrmont public testnet of Ethereum 2.0 to check how Altair upgrades perform when handling heavy loads. The next testnet, scheduled for September 2nd, 2021 at 12:00 pm UTC, is named Prater and will be larger and longer-term testnet than Pyrmont. Barring significant programming and performance issues on the testnet, Altair will be upgraded on the Beacon Chain toward the end of September.

Ethereum 2.0 Beacon Chain

The most significant difference between the original Ethereum network and Ethereum 2.0 is that Ethereum 2.0 will implement a Proof-of-Stake consensus mechanism, a change from Ethereum's original Proof-of-Work consensus mechanism.

A consensus mechanism is the method a blockchain system uses to agree on a single state of the network. Because blockchains are powered by distributed computers that are not inherently connected to one another, there must be a method to agree on the state of the network at regular time intervals. This ensures that there is only one official version of the Ethereum blockchain and ensures that all distributed computers have access to the same information.

The current consensus mechanism on Ethereum is Proof-of-Work. Proof-of-Work is widely considered a safe but energy intensive consensus mechanism. In Proof-of-Work, miners use computing power to attempt to solve a difficult cryptographic puzzle that rewards them the right to verify transactions and add a block to the blockchain. Although Proof-of-Work is considered an extremely safe consensus mechanism due to the sheer amount of computing power that would be required to undermine it, it is extremely energy intensive and thus caps the scalability of the network.

Ethereum 2.0 will change the network consensus mechanism to Proof-of-Stake through the Beacon Chain. Proof-of-Stake is a much more scalable and energy-friendly consensus mechanism as it delegates validators to create blocks instead of having miners compete against each other. In addition, the Beacon Chain will consist of 64 different shard chains, which will share an understanding of the state of the network. As a result, Ethereum 2.0 will be able to stay in sync while creating multiple blocks at the same time. The Beacon Chain will facilitate the coordination needed to assure that these shard chains do not conflict with each other.

It should be noted that the Beacon Chain is not a replacement to the current Ethereum mainnet. The Beacon Chain does not inherently support smart contract functionality and simply acts as a device for facilitating Proof-of-Stake functionality. As of now, the Beacon Chain and Ethereum mainnet are being developed in parallel; later these two will merge so that the Ethereum mainnet will run on the Beacon Chain while using Proof-of-Stake as its consensus mechanism.

Altair Upgrade

The Altair upgrade is the first hard fork on the Beacon Chain and largely involves changes adjusting economic incentives and penalties for validators. Validators will risk further economic penalties for failing to confirm transactions that they are responsible for, further incentivizing a more secure network. Economic incentives and penalties are critical for maintaining a healthy Proof-of-Stake ecosystem as validators must have enough compensation to maintain running their nodes while also being penelized enough to carefully maintain operations.

To see a full specifics about the Altair hard fork, please click here.

https://cobak.co.kr/+tKlcwj4

from http://missttoong.tistory.com/649 by ccl(A) rewrite - 2021-08-26 19:26:37